{"title":"Wacker Neuson Clear Water Pump Parts","description":"\u003cp\u003eOEM replacement parts for Wacker Neuson clear water pumps. Impellers, seals, housings, and engine components that keep dewatering equipment moving. Genuine Wacker Neuson parts from an authorized dealer.\u003c\/p\u003e","products":[{"product_id":"wacker-neuson-oem-impeller-pg2-pg2a-water-pump-5000110501","title":"Wacker Neuson OEM Impeller PG2, PG2A Water Pump | 5000110501","description":"\u003cp\u003eThis is a genuine Wacker Neuson OEM impeller for the PG2A clear water pump. The impeller is the rotating component inside the pump housing responsible for drawing in water and generating the flow and pressure needed to move it through the discharge line.\u003c\/p\u003e\u003cp\u003eA worn or damaged impeller results in reduced flow rate, loss of prime, or complete failure to pump water. Replacing the impeller restores the pump to its designed performance specifications.\u003c\/p\u003e\u003cp\u003eFits the following models:\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePG2A\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Wacker Neuson OEM part. Sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43394526085168,"sku":"WACKER-5000110501","price":43.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/57_fa572f28-e4c4-4ee3-a487-fa1f00fe766a.png?v=1783961534"},{"product_id":"wacker-neuson-gasket-5000026919-for-water-and-trash-pumps","title":"Wacker Neuson Gasket 5000026919 for Water and Trash Pumps","description":"\u003cp\u003eThis gasket, part number 5000026919, seats at the coupling and clutch assembly locations on Wacker Neuson 2-inch water and trash pumps, providing a sealing interface between mating pump components to prevent fluid leakage at those joints.\u003c\/p\u003e\n\n\u003cp\u003eSourced directly from Wacker Neuson's OEM parts catalog, this gasket appears across multiple assembly locations including the PG2A clutch, PS21503 pump special accessories, PS22203 pump special accessories, PS22203L pump special accessories, and PS23703 pump special accessories sections. Its presence across this range of coupling and accessory assemblies makes it a frequently needed seal when servicing or reassembling pump drive and discharge connections.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePDI 2, PDI 2A\u003c\/li\u003e\n\u003cli\u003ePDT 2, PDT 2A\u003c\/li\u003e\n\u003cli\u003ePG 2, PG 2A, PG 2TA, PG2A\u003c\/li\u003e\n\u003cli\u003ePS2 500, PS2 750, PS2 800, PS2 1500, PS2 1503, PS2 1503L, PS2 2203, PS2 3703\u003c\/li\u003e\n\u003cli\u003ePS 2 500, PS 2 750, PS 2 1503L, PS 2 2203L\u003c\/li\u003e\n\u003cli\u003ePS21503, PS21503L, PS22203, PS22203L, PS23703, PS2500, PS2750, PS2800\u003c\/li\u003e\n\u003cli\u003ePSA2 500, PSA2 800, PSA21503L, PSA22203L, PSA2500, PSA2800\u003c\/li\u003e\n\u003cli\u003ePSA 2 1503L, PSA 2 2203L\u003c\/li\u003e\n\u003cli\u003ePSC 2 0753\u003c\/li\u003e\n\u003cli\u003ePST 2 400, PST2 400\u003c\/li\u003e\n\u003cli\u003ePT 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396242767920,"sku":"WACKER-5000026919","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000026919.jpg?v=1784009726"},{"product_id":"wacker-neuson-3-hose-shank-coupling-external-thread-5000028071","title":"Wacker Neuson 3\" Hose Shank Coupling External Thread 5000028071","description":"\u003cp\u003eThis 3-inch hose shank coupling with external thread connects pump discharge or suction hoses to compatible Wacker Neuson water pump models, and is listed as a named component in the pump hose set and hose kit assemblies for the PDI3A, PDT3A, PG3A, PT3A, and PT3A(I) configurations. The coupling is also referenced as a numbered coupling component in the PS3 1500 and PS3 2200 installation documentation, where it appears at position 1 in the pump assembly diagram alongside the mechanical seal, gasket, sleeve, and volute. The hose shank design allows a standard hose to be secured over the barbed end, while the external thread provides a fixed connection point on the pump body side.\u003c\/p\u003e\n\n\u003cp\u003eThis part fits the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePDI3A, PDI3A(I)\u003c\/li\u003e\n\u003cli\u003ePDT 3, PDT3A\u003c\/li\u003e\n\u003cli\u003ePG 3, PG3A\u003c\/li\u003e\n\u003cli\u003ePS2 1503, PS2 2203, PS2 3703, PS3 1503, PS3 2203, PS3 3703, PS3 5503\u003c\/li\u003e\n\u003cli\u003ePS31503, PS32203, PS33703, PS35503\u003c\/li\u003e\n\u003cli\u003ePSC 3 1503, PSC 3 1603EX\u003c\/li\u003e\n\u003cli\u003ePST3 750\u003c\/li\u003e\n\u003cli\u003ePT 3, PT 3(I), PT 3H, PT 3V, PT3, PT3A, PT3A(I), PT3H, PT3Y\u003c\/li\u003e\n\u003cli\u003ePTK3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396244275248,"sku":"WACKER-5000028071","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000028071.jpg?v=1784009744"},{"product_id":"wacker-neuson-3-inch-hose-shank-coupling-with-internal-thread-5000028072","title":"Wacker Neuson 3-Inch Hose Shank Coupling with Internal Thread 5000028072","description":"\u003cp\u003eThis 3-inch hose shank coupling with internal thread connects discharge or suction hoses to Wacker Neuson pumps, threading directly into the pump body or accessory fitting at the coupling and suction strainer assembly locations. Sized for 3-inch hose connections, it is listed in the accessories, coupling, and clutch assembly sections across multiple pump families, including clear water, dewatering, diaphragm, and trash pump models.\u003c\/p\u003e\n\n\u003cp\u003eThe internal thread design allows the shank to seat securely into the mating port, creating a leak-resistant hose connection for pump operation. This part appears in the suction strainer assembly of PT3A pumps alongside the hose coupling, clamp, and strainer components, serving as the interface between the hose and the strainer assembly. It is also listed as a special accessory for PS3 series pumps including the PS32203, PS33703, and PS35503 configurations.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDI 3, PDI 3A\u003c\/li\u003e\n\u003cli\u003ePDT 3, PDT 3A\u003c\/li\u003e\n\u003cli\u003ePG 3, PG 3A, PG 3TA, PG3A\u003c\/li\u003e\n\u003cli\u003ePS2 1503, PS2 2203, PS2 3703\u003c\/li\u003e\n\u003cli\u003ePS3 1500, PS3 1503, PS3 2200, PS3 2203, PS3 3703, PS3 5503\u003c\/li\u003e\n\u003cli\u003ePSC 3 1503, PSC 3 1603EX\u003c\/li\u003e\n\u003cli\u003ePST3 750\u003c\/li\u003e\n\u003cli\u003ePT 3, PT 3H, PT3, PT3A, PT3H, PT3V, PT3Y, PTK3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396244504624,"sku":"WACKER-5000028072","price":60.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000028072.jpg?v=1784009748"},{"product_id":"wacker-neuson-3-hose-coupling-gasket-5000028073-for-water-pumps","title":"Wacker Neuson 3-Hose Coupling Gasket 5000028073 for Water Pumps","description":"\u003cp\u003eThis is the 3-hose coupling gasket for Wacker Neuson water pumps, sealing the hose coupling to the housing cover at the pump outlet connection. Positioned at the coupling assembly, this gasket creates a watertight seal between the hose coupling and housing cover, secured by three bolts and three washers during assembly.\u003c\/p\u003e\n\n\u003cp\u003eDuring reassembly, Wacker Neuson service procedures specify positioning this gasket alongside the hose coupling against the housing cover, then tightening each of the three mounting bolts sequentially in one-quarter turns until the seal is evenly distributed and tight. This sequential torque method ensures the gasket seats uniformly across all three contact points, preventing leaks under operating pressure. The gasket applies across a wide range of 3-inch class clear water, dewatering, diaphragm, and trash pump models.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDI 3, PDI 3A\u003c\/li\u003e\n\u003cli\u003ePDT 3, PDT 3A\u003c\/li\u003e\n\u003cli\u003ePG 3, PG 3A, PG 3TA, PG3A\u003c\/li\u003e\n\u003cli\u003ePS 2 3703, PS2 1503, PS2 2203, PS2 3703\u003c\/li\u003e\n\u003cli\u003ePS3 1500, PS3 1503, PS3 2200, PS3 2203, PS3 3703, PS3 5503\u003c\/li\u003e\n\u003cli\u003ePS31500, PS31503, PS32200, PS32203, PS33703, PS35503\u003c\/li\u003e\n\u003cli\u003ePSC 3 1503, PSC 3 1603EX\u003c\/li\u003e\n\u003cli\u003ePST3 750\u003c\/li\u003e\n\u003cli\u003ePT 3, PT 3(i), PT 3H, PT3, PT3A, PT3H, PT3V, PT3Y, PTK3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396244832304,"sku":"WACKER-5000028073","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000028073.jpg?v=1784009752"},{"product_id":"wacker-neuson-t-bolt-clamp-5000028698-for-pumps-generators","title":"Wacker Neuson T-Bolt Clamp 5000028698 for Pumps \u0026 Generators","description":"\u003cp\u003eThis T-bolt clamp, part number 5000028698, secures hose and intake connections at assembly points including the air cleaner, air filter, engine compartment, cooling lower, and intake\/exhaust manifold locations across a wide range of Wacker Neuson pumps, generators, and compaction equipment. The T-bolt style provides a uniform radial clamping force around the full circumference of the connection, making it well suited for pressurized or vibration-prone joints where a standard worm-gear clamp may not maintain adequate seating. It is used at the air cleaner assembly on many of the compatible generator models, where a properly seated clamp prevents unfiltered air from bypassing the filter element and entering the engine.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eG70, G90, G100, G120, G130, G150, G180, G230, G240\u003c\/li\u003e\n\u003cli\u003eG160, LTV4K\u003c\/li\u003e\n\u003cli\u003eCRT 48-31V-H, HTC15\u003c\/li\u003e\n\u003cli\u003ePS2 500, PS2 750, PS2 800, PS2 1500, PS2 1503, PS2 1503L, PS2 2203, PS2 2203L, PS2 3703\u003c\/li\u003e\n\u003cli\u003ePDT2A, PDI2A(I), PG2, PG2A, PS280\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis clamp appears across multiple machine families including clear water pumps, dewatering pumps, diaphragm pumps, trash pumps, mobile generators, light towers, ride-on trowels, rollers, and trench rollers, reflecting its use as a standard fastening solution wherever a secure hose or duct connection is required in the field.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396247617584,"sku":"WACKER-5000028698","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000028698.jpg?v=1784009796"},{"product_id":"wacker-neuson-quick-disconnect-coupling-gasket-5000053387-for-pumps","title":"Wacker Neuson Quick Disconnect Coupling Gasket 5000053387 for Pumps","description":"\u003cp\u003eThis is the OEM coupling gasket for the 2-inch quick disconnect (Q.D.) coupling connection, sealing the pump outlet interface on Wacker Neuson 2-inch clear water, dewatering, diaphragm, and trash pumps. It seats within the coupling assembly where the pump connects to discharge accessories, preventing leakage at the quick disconnect joint during operation.\u003c\/p\u003e\n\n\u003cp\u003eThe gasket is used across the full range of 2-inch Wacker Neuson pump models, appearing in the coupling and pump special accessories assemblies. Compatible models include pumps in the PS2, PSA2, PDI, PDT, PT, PG, PST, and PSC series. According to Wacker Neuson specifications for these pumps, the coupling connection type covers barb, BSP, and QD configurations, making a properly seated gasket important for a leak-free discharge connection.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePDI 2, PDI 2A, PDT 2, PDT 2A\u003c\/li\u003e\n\u003cli\u003ePG 2, PG 2A, PG 2TA, PG2A\u003c\/li\u003e\n\u003cli\u003ePS2 500, PS2 750, PS2 800, PS2 1503, PS2 2203, PS2 3703\u003c\/li\u003e\n\u003cli\u003ePS21503, PS21503L, PS22203, PS22203L, PS23703\u003c\/li\u003e\n\u003cli\u003ePSA2 500, PSA2 800, PSA21503L, PSA22203L\u003c\/li\u003e\n\u003cli\u003ePSC 2 0753, PST 2 400, PST2 400\u003c\/li\u003e\n\u003cli\u003ePT 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396370661424,"sku":"WACKER-5000053387","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053387.jpg?v=1784011111"},{"product_id":"wacker-neuson-coupling-gasket-5000053388-for-water-trash-pumps","title":"Wacker Neuson Coupling Gasket 5000053388 for Water \u0026 Trash Pumps","description":"\u003cp\u003eThis coupling gasket seals the quick-disconnect coupling assembly on Wacker Neuson 3-inch water and trash pumps, preventing leakage at the pump-to-coupling interface. Identified in pump assembly diagrams as the gasket positioned at the coupling (Ref. 3), it sits between the coupling and the mechanical seal housing and must maintain a reliable seal under continuous pumping conditions.\u003c\/p\u003e\n\n\u003cp\u003eWacker Neuson service documentation specifies that gaskets and O-rings should be replaced each time the pump is disassembled or inspected, making this a routine consumable during any pump teardown or seal service. Because the coupling is listed as a top-level assembly component alongside the mechanical seal, sleeve, and dust seal, replacing this gasket at the same interval keeps the entire pump sealing system in consistent condition. Ignoring gasket replacement during disassembly risks oil contamination in the lubricant compartment, which manifests as a milky appearance and signals mechanical seal failure.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDI 3, PDI 3A\u003c\/li\u003e\n\u003cli\u003ePDT 3, PDT 3A\u003c\/li\u003e\n\u003cli\u003ePG 3, PG 3A, PG 3TA, PG3A\u003c\/li\u003e\n\u003cli\u003ePS2 1503, PS2 2203, PS2 3703, PS 2 3703\u003c\/li\u003e\n\u003cli\u003ePS3 1500, PS3 1503, PS3 2200, PS3 2203, PS3 3703, PS3 5503\u003c\/li\u003e\n\u003cli\u003ePS31500, PS31503, PS32200, PS32203, PS33703, PS35503\u003c\/li\u003e\n\u003cli\u003ePSC 3 1503, PSC 3 1603EX\u003c\/li\u003e\n\u003cli\u003ePST3 750\u003c\/li\u003e\n\u003cli\u003ePT 3, PT 3(i), PT 3H, PT3, PT3A, PT3A(I), PT3H, PT3V, PT3Y, PTK3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396370890800,"sku":"WACKER-5000053388","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053388.jpg?v=1784011115"},{"product_id":"wacker-neuson-flange-nut-5000053616-for-floor-saws-and-vibratory-plates","title":"Wacker Neuson Flange Nut 5000053616 for Floor Saws and Vibratory Plates","description":"\u003cp\u003eThis flange nut, Wacker Neuson part 5000053616, is a fastening hardware component used across multiple assembly locations including the Air Cleaner, Air Cleaner cpl., Air Cleaner\/Carburetor, and camshaft-exhaust assemblies on BFS series floor saws and BPU vibratory plates. The flanged design integrates a washer-like bearing surface directly into the nut body, distributing clamping load evenly and reducing the risk of loosening under vibration, which is a common operating condition on compaction and cutting equipment.\u003c\/p\u003e\n\n\u003cp\u003eThis nut appears in camshaft-exhaust assemblies on the BFS 1345W, BFS 1345Wz, BFS 1350W, BFS 1350Wz, and BPU 3050, as well as in air cleaner assemblies across a wide range of walk-behind saws, reversible and single-direction vibratory plates, rollers, trowels, pumps, and generators. When servicing air cleaner housings or camshaft-exhaust covers on compatible machines, inspect any fasteners in these areas for wear, corrosion, or thread damage and replace as needed to maintain secure assembly.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1135R, AP 1550R\u003c\/li\u003e\n\u003cli\u003eBFS 12, BFS 1214, BFS 130R, BFS 130RM, BFS 1345, BFS 1345B, BFS 1345BZ, BFS 1345W, BFS 1345Wz, BFS 1350B, BFS 1350L, BFS 1350W, BFS 1350Wz, BFS 16, BFS 18D, BFS 614B, BFS 90R, BFS 914B, BFS 914W, BFS 935B, BFS 940W\u003c\/li\u003e\n\u003cli\u003eBFSX 1214, BFSX 130R, BFSX 130RM, BFSX 16, BFSX 90R\u003c\/li\u003e\n\u003cli\u003eBPU 2540, BPU 3050\u003c\/li\u003e\n\u003cli\u003eCRT 36-25, CT 36-6, CT 36-6 EU, CT 36-9, CT 36-9-V, CT 36-9-V EU, CT 48-9\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396373086256,"sku":"WACKER-5000053616","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053616.jpg?v=1784011142"},{"product_id":"wacker-neuson-flange-bolt-5000053648-for-blower-housing","title":"Wacker Neuson Flange Bolt 5000053648 for Blower Housing","description":"\u003cp\u003eThis flange bolt secures blower housing assemblies across a wide range of Wacker Neuson equipment, fitting directly into the Blower Housing, Blower Housing VP 1135, Blower Housing VP 1135RW NWT, Blower Housing VP 1340, Blower Housing VP 50, Blower Housing VP 50X, Blower Housing VP 60, and related blower housing configurations.\u003c\/p\u003e\n\n\u003cp\u003ePart number 5000053648 is a genuine Wacker Neuson flange bolt used in the blower housing assembly. Flange bolts of this type distribute clamping load across the housing surface, reducing the risk of loosening under the vibration and operational stress typical of compaction and cutting equipment. This bolt is sourced directly from Wacker Neuson and matches the exact specification required for the assemblies listed above.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1135R, AP 1550R\u003c\/li\u003e\n\u003cli\u003eBFS 12, BFS 1214, BFS 16, BFS 614B, BFS 90R, BFSX 1214, BFSX 16, BFSX 90R\u003c\/li\u003e\n\u003cli\u003eBPU 2540, BPU 3050\u003c\/li\u003e\n\u003cli\u003eCRT 36-25, CT 36-6, CT 36-9, CT 36-9-V, CT 48-9\u003c\/li\u003e\n\u003cli\u003eD 4000, DPS 1850Y, DPU 2950Y\u003c\/li\u003e\n\u003cli\u003eGH 3500, GH 3500E, GPi 1700\u003c\/li\u003e\n\u003cli\u003ePDI 2, PDI 3, PDT 2, PDT 3\u003c\/li\u003e\n\u003cli\u003ePG 2, PG 3, PT 2, PT 3, PT 3(i), PT2R, PT2Y, PT3Y\u003c\/li\u003e\n\u003cli\u003eRD 3.7, RS 600, RS60\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396374593584,"sku":"WACKER-5000053648","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053648.jpg?v=1784011155"},{"product_id":"wacker-neuson-carburetor-gasket-5000053688-for-vibratory-plates","title":"Wacker Neuson Carburetor Gasket 5000053688 for Vibratory Plates","description":"\u003cp\u003eThis carburetor gasket (Wacker Neuson part 5000053688) seals the carburetor assembly on a wide range of Wacker Neuson equipment, fitting at the carburetor and carburetor assembly locations across multiple machine families including vibratory plates, floor saws, trash pumps, portable generators, walk-behind rollers, walk-behind trowels, diaphragm pumps, and dewatering pumps.\u003c\/p\u003e\n\n\u003cp\u003eA properly sealing carburetor gasket prevents air and fuel leaks at the carburetor interface, which can otherwise cause hard starting, erratic engine speed, lean running conditions, or loss of power. Replacing this gasket during carburetor service or rebuild is standard practice to ensure a proper seal between mating surfaces. This part fits carburetor assemblies including those designated for the VP 1135, VP 1135RW NWT, VP 1340, VP 50, VP 50X, and VP 60 series, among others.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1135R, AP 1550R\u003c\/li\u003e\n\u003cli\u003eBFS 12, BFS 1214, BFS 614B, BFSX 1214\u003c\/li\u003e\n\u003cli\u003eBPU 2540\u003c\/li\u003e\n\u003cli\u003eCT 36-6, CT 36-6 EU\u003c\/li\u003e\n\u003cli\u003eGH 3500, GP 2600\u003c\/li\u003e\n\u003cli\u003ePDI 2, PDI 3, PDT 2, PDT 3\u003c\/li\u003e\n\u003cli\u003ePG 2, PG 3, PT 2\u003c\/li\u003e\n\u003cli\u003eRD 3.7, RS 600\u003c\/li\u003e\n\u003cli\u003eTEH 1\u003c\/li\u003e\n\u003cli\u003eVP 1035R, VP 1135R, VP 1135R NWT, VP 1135R-AU, VP 1135RW, VP 1135RW NWT\u003c\/li\u003e\n\u003cli\u003eVP 1340, VP 1340R, VP 1340RW, VP 1340W, VP 1340W-L, VP 1340W-LF, VP 1340W-LL\u003c\/li\u003e\n\u003cli\u003eVP 1550, VP 1550R, VP 1550RW\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396376330288,"sku":"WACKER-5000053688","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053688.jpg?v=1784011173"},{"product_id":"wacker-neuson-shaft-seal-5000053983-for-vibratory-plates-and-pumps","title":"Wacker Neuson Shaft Seal 5000053983 for Vibratory Plates and Pumps","description":"\u003cp\u003eThis shaft seal installs at the crankcase cover, base cover, and cylinder housing assemblies across a wide range of Wacker Neuson compaction, pumping, and cutting equipment, preventing fluid and debris ingress at rotating shaft interfaces. It is listed in assembly locations including the BPU 2540A crankcase cover, BPU 2440A crankcase cover, connecting rod and camshaft assemblies, and cylinder head and cylinder housing sections, making it a direct-service part for scheduled maintenance or seal replacement following oil leakage or shaft wear.\u003c\/p\u003e\n\n\u003cp\u003eShaft seals in these assemblies are subject to wear from continuous rotational contact, heat cycling, and exposure to water, oil, and particulate matter. Replacing a degraded seal restores the integrity of the crankcase or pump housing and prevents contamination of internal components. This part is priced at $23.95 and fits a broad range of Wacker Neuson machines, including vibratory plates, dewatering pumps, trash pumps, floor saws, trowels, internal vibrators, walk-behind rollers, and portable generators.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US, BPU 3050A, BPU2540A CN\u003c\/li\u003e\n\u003cli\u003eAP 1550A, AP 1550AW, BPS1550A, BPS1550Aw, BPS2050A, BPS2050Aw\u003c\/li\u003e\n\u003cli\u003eBFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eCT 30AGT, CT 30AGT-E, CT 36-5A, CT 36-5A EU, CT 36ADP, CT 36ADT\u003c\/li\u003e\n\u003cli\u003eBT24A, BT36A, DT05, D3.5A2, D3.5A3\u003c\/li\u003e\n\u003cli\u003eA 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eG 2.1A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396377116720,"sku":"WACKER-5000053983","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053983.jpg?v=1784011186"},{"product_id":"wacker-neuson-radial-ball-bearing-6205-5000053984","title":"Wacker Neuson Radial Ball Bearing 6205 5000053984","description":"\u003cp\u003eThis 6205 radial ball bearing seats in the crankcase cover and supports rotating shaft assemblies including the connecting rod and camshaft on a wide range of Wacker Neuson equipment. Designated as a standard 6205 series radial ball bearing, it is designed to carry radial loads and maintain shaft alignment within the crankcase cover assembly, where wear or failure can result in increased noise, shaft wobble, or seized rotation.\u003c\/p\u003e\n\n\u003cp\u003eThis bearing fits across multiple machine families, including vibratory plates, reversible plates, walk-behind rollers, trowels, truss screeds, portable generators, clear water pumps, dewatering pumps, trash pumps, and modular internal vibrators. Compatible models include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eA 5000\u003c\/li\u003e\n\u003cli\u003eAP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A\u003c\/li\u003e\n\u003cli\u003eCT 30AGT, CT 30AGT-E, CT 36-5A, CT 36-5A-C, CT 36ADP, CT 36ADP-E, CT 36ADT, CT 36ADT-E, CT36-5A EU\u003c\/li\u003e\n\u003cli\u003eG 2.1A, G 2.1AE, G 2.5A, G 5.7AE, GV 2500A\u003c\/li\u003e\n\u003cli\u003eHD 3.7\u003c\/li\u003e\n\u003cli\u003eHP 100, HP 100A, HP 50, HP50A\u003c\/li\u003e\n\u003cli\u003eMP 15A\u003c\/li\u003e\n\u003cli\u003ePG 3A, PG3A\u003c\/li\u003e\n\u003cli\u003ePT 2A, PT2A, PT2A(I)\u003c\/li\u003e\n\u003cli\u003eRS 600A, RS600A\u003c\/li\u003e\n\u003cli\u003eSP 50, SP 75\u003c\/li\u003e\n\u003cli\u003eVP 1340A, VP 1340AW, VP 1550A, VP 1550AW, VP 2050A, VP 2050AW\u003c\/li\u003e\n\u003cli\u003eVPA 1340, VPA 1350\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396377509936,"sku":"WACKER-5000053984","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053984.jpg?v=1784011191"},{"product_id":"wacker-neuson-screw-5000053990-for-vibratory-plates-and-generators","title":"Wacker Neuson Screw 5000053990 for Vibratory Plates and Generators","description":"\u003cp\u003eThis screw, Wacker Neuson part 5000053990, is used in the cylinder head, governor, air ducting, and air filter assemblies across a wide range of Wacker Neuson equipment, including vibratory plates, portable generators, floor saws, and pumps. It is a fastener serving structural and sealing functions within these assemblies, securing components such as the cylinder head cover, governor housing, and air filter housing in place during operation.\u003c\/p\u003e\n\n\u003cp\u003eThis screw is found in the A5000\/160 ANSI and ISO cylinder head and governor assemblies, as well as in air cleaner, muffler, governor, air ducting, and air filter insert assemblies. Correct fastener torque and condition are important in cylinder head and governor applications, where loose or damaged hardware can affect engine operation and sealing. Always consult the applicable Wacker Neuson service manual for the correct torque specification when installing this screw.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 100, BFS 80, BFS 735, BFS 735A, BFS 914A\u003c\/li\u003e\n\u003cli\u003eBFS 1318A, BFS 1318AB, BFS 1318AS\u003c\/li\u003e\n\u003cli\u003eBFS 1335A, BFS 1345, BFS 1345A, BFS 1345AB, BFS 1345ABZ, BFS 1345AL, BFS 1345ALS, BFS 1345AS, BFS 1345Az\u003c\/li\u003e\n\u003cli\u003eBFS 1350, BFS 1350A, BFS 1350AB, BFS 1350ABZ, BFS 1350AL, BFS 1350ALS, BFS 1350AS, BFS 1350Az, BFS 1350L\u003c\/li\u003e\n\u003cli\u003eBFS 2020AS, BFS 614AB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396377706544,"sku":"WACKER-5000053990","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053990.jpg?v=1784011195"},{"product_id":"wacker-neuson-a8x14-dowel-pin-5000053995-for-vibratory-plates","title":"Wacker Neuson A8x14 Dowel Pin 5000053995 for Vibratory Plates","description":"\u003cp\u003eThis A8 x 14 mm dowel pin installs at the crankcase cover assembly on a wide range of Wacker Neuson compaction and floor saw equipment, providing precise alignment and positional retention between mating components at the crankcase cover, connecting rod, and camshaft interfaces.\u003c\/p\u003e\n\n\u003cp\u003eThe pin measures 8 mm in diameter and 14 mm in length, conforming to standard dowel pin geometry used to locate and secure crankcase cover assemblies during assembly and service. Proper installation ensures accurate component alignment, preventing misalignment that could lead to oil leaks or premature wear at the crankcase cover joint. When servicing the crankcase cover on any compatible model, inspect this pin for wear, scoring, or deformation and replace as needed before reassembling the cover.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030A US, BPS1030Aw, BPS1030Aw EU, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A EU, BPS1135A US, BPS1135Aw, BPS1135Aw EU, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A EU, BPS1340A US, BPS1340Aw, BPS1340Aw EU, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPU2440A, BPU2540A, BPU2540A US, BPU2540A CN\u003c\/li\u003e\n\u003cli\u003eBFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396378492976,"sku":"WACKER-5000053995","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000053995.jpg?v=1784011203"},{"product_id":"wacker-neuson-m14-nut-5000054005-for-vibratory-plates-pumps","title":"Wacker Neuson M14 Nut 5000054005 for Vibratory Plates \u0026 Pumps","description":"\u003cp\u003eThis M14 nut secures flywheel and crankshaft assemblies across a wide range of Wacker Neuson equipment, appearing in flywheel, crankshaft\/piston, and exhaust-tank-flywheel assembly locations on machines including vibratory plates, pumps, generators, trowels, and internal vibrators. It is used in assemblies such as the BPU 2540A Flywheel, BPU 2440A and BPU 2450A Exhaust-Tank-Flywheel, A5000\/160 ANSI and ISO Flywheel, and the HP50 assembly grouping.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eCT 30ADT, CT 30AGT, CT 30AGT-E, CT 36-5A, CT 36-5A-C, CT 36ADP, CT 36ADP-E, CT 36ADT, CT 36ADT-E, CT30ADT, CT30ADT-E, CT36-5A EU\u003c\/li\u003e\n\u003cli\u003eG 2.1A, G 2.1AE, G 2.5A, G 5.7AE, GV 2500A\u003c\/li\u003e\n\u003cli\u003eHP 100, HP 100A, HP 50, HP50A\u003c\/li\u003e\n\u003cli\u003ePDI 2A, PDI 3A, PDT 2A, PDT 3A\u003c\/li\u003e\n\u003cli\u003ePG 2A, PG 3A, PG2A, PG3A\u003c\/li\u003e\n\u003cli\u003ePT 2A, SP 50, SP 75\u003c\/li\u003e\n\u003cli\u003eVP 1135A, VP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSourcing the correct fastener size and grade for flywheel and crankshaft applications ensures proper torque retention and prevents loosening under the vibration loads these machines generate during operation. Part number 5000054005 is the factory-specified M14 nut for these assemblies.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396378787888,"sku":"WACKER-5000054005","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054005.jpg?v=1784011208"},{"product_id":"wacker-neuson-pin-5000054033-for-vibratory-plates-and-rammers","title":"Wacker Neuson Pin 5000054033 for Vibratory Plates and Rammers","description":"\u003cp\u003eThis pin (part number 5000054033) is a structural fastening pin used at the base cover and cylinder housing assembly locations across a wide range of Wacker Neuson compaction and pumping equipment. It secures internal components within assemblies including the BFS 735 cylinder housing, BPU 2540A cylinder housing, BPS series base covers, and BS50 assemblies, keeping critical housing sections properly aligned and retained during operation.\u003c\/p\u003e\n\n\u003cp\u003eSourced directly from Wacker Neuson's OEM parts catalog, this pin is manufactured to factory specifications for the exact fit and retention characteristics required in these assemblies. Worn, bent, or missing pins at these locations can result in misalignment of housing components, increased vibration, or loss of structural integrity in the base cover assembly. Replacing a damaged or missing pin with a genuine part restores correct assembly geometry and prevents further wear to surrounding components.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS 735 CN\u003c\/li\u003e\n\u003cli\u003eBFS 2020AS\u003c\/li\u003e\n\u003cli\u003eBPS 1030A, BPS 1030Aw (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS 1135A, BPS 1135Aw (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS 1340A, BPS 1340Aw, BPS 1340Aws (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS 1550A, BPS 1550Aw, BPS 2050A, BPS 2050Aw\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2540A (standard, US, and CN variants)\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396379050032,"sku":"WACKER-5000054033","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054033.jpg?v=1784011212"},{"product_id":"wacker-neuson-governor-spring-5000054088-for-bfs-bps-series","title":"Wacker Neuson Governor Spring 5000054088 for BFS \u0026 BPS Series","description":"\u003cp\u003eThis spring fits within the governor assembly of Wacker Neuson generators and vibratory plates, where it provides the tensioning force that regulates engine speed under varying load conditions. It is listed under the Air Cleaner\/Muffler\/Governor and Speed Governor assemblies across multiple machine configurations, including the A5000\/160 ANSI Governor, A5000\/160 ISO Governor, BFS 1318A Governor, BFS 1318AB Governor, BFS 1345 Governor, and BFS 1345 Speed Governor sections of the official Wacker Neuson parts catalogs.\u003c\/p\u003e\n\n\u003cp\u003eThis spring is a direct catalog part for the following compatible models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 80, BFS 100, BFS 614AB, BFS 735, BFS 735A\u003c\/li\u003e\n\u003cli\u003eBFS 914A, BFS 914AB, BFS 93\u003c\/li\u003e\n\u003cli\u003eBFS 1318A, BFS 1318AB, BFS 1318AS\u003c\/li\u003e\n\u003cli\u003eBFS 1335A\u003c\/li\u003e\n\u003cli\u003eBFS 1345, BFS 1345A, BFS 1345AB, BFS 1345ABZ, BFS 1345AL, BFS 1345ALS, BFS 1345AS, BFS 1345Az\u003c\/li\u003e\n\u003cli\u003eBFS 1350, BFS 1350A, BFS 1350AB, BFS 1350ABZ, BFS 1350AL, BFS 1350ALS, BFS 1350AS, BFS 1350Az\u003c\/li\u003e\n\u003cli\u003eBFS 2020AS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhen a governor spring stretches, fatigues, or loses tension, the engine may hunt for speed, surge under load, or fail to hold a steady RPM, making prompt replacement important for generator output stability and plate compactor performance. Part number 5000054088.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396380229680,"sku":"WACKER-5000054088","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054088.jpg?v=1784011217"},{"product_id":"wacker-neuson-fuel-tank-cap-gasket-5000054131-for-pumps-plates","title":"Wacker Neuson Fuel Tank Cap Gasket 5000054131 for Pumps \u0026 Plates","description":"\u003cp\u003eThis is the fuel tank cap gasket for Wacker Neuson equipment, sealing the interface between the fuel tank cap and the tank opening to prevent fuel leaks and contamination. It is located in the Air Filter, Fuel Tank, and Exhaust assembly on applicable machines, and in the Fuel Tank and Throttle Lever assembly on CT36 and CT48 trowel models.\u003c\/p\u003e\n\n\u003cp\u003eThe gasket seats against the fuel tank cap to maintain a secure, fuel-tight closure during operation and transport. A worn or damaged tank cap gasket can allow fuel to seep past the cap, introducing dirt or moisture into the tank and creating a potential safety hazard. Inspecting and replacing this gasket as part of routine fuel system maintenance helps keep fuel clean and contained, which is especially important on equipment that is moved frequently or stored at varying angles.\u003c\/p\u003e\n\n\u003cp\u003ePart number 5000054131 fits a wide range of Wacker Neuson machines across multiple product families, including floor saws, vibratory plates, trowels, pumps, portable generators, rollers, and truss screeds.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1550A, AP 1550AW, AP1135A\u003c\/li\u003e\n\u003cli\u003eBFS 1318AB, BFS 1335A, BFS 1345A, BFS 1345AB, BFS 1345ABZ, BFS 1345AL, BFS 1345ALS, BFS 1345AS\u003c\/li\u003e\n\u003cli\u003eBFS 1350A, BFS 1350AL, BFS 1350ALS, BFS 1350AS\u003c\/li\u003e\n\u003cli\u003eBFS 914AB, BFS 935A, BFS 935AB, BFS 935AL, BFS 940A\u003c\/li\u003e\n\u003cli\u003eBPS 2550A, BPU 5045A\u003c\/li\u003e\n\u003cli\u003eCT 30ADT, CT 30AGT, CT 30AGT-E\u003c\/li\u003e\n\u003cli\u003eCT 36-5A, CT 36-5A-C, CT 36-8A, CT 36-8A-V, CT 36ADP, CT 36ADP-E, CT 36ADT, CT 36ADT-E, CT 36AGP, CT 36AGP-E, CT 36AGT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396380491824,"sku":"WACKER-5000054131","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054131.jpg?v=1784011221"},{"product_id":"wacker-neuson-b8-hose-clip-clamp-5000054136-for-pumps-plates","title":"Wacker Neuson B8 Hose Clip Clamp 5000054136 for Pumps \u0026 Plates","description":"\u003cp\u003eThis B8 hose clip clamp secures hose connections at the air filter, fuel tank, and exhaust assemblies across a wide range of Wacker Neuson equipment, including floor saws, vibratory plates, and pumps. Designated as part 5000054136, it is used in assembly locations such as the Air Filter Insert cpl., Air Filter-Fuel Tank-Exhaust, BFS 1345AB Air filter-Tank-Exhaust, BFS 935AB Air filter-Tank-Exhaust, BPU 2440A Exhaust-Tank-Flywheel, BPU 2450A Exhaust-Tank-Flywheel, and the Canister grouping.\u003c\/p\u003e\n\n\u003cp\u003eHose clamps at fuel and air filter connections are subject to vibration and heat cycling during normal operation. A properly seated clamp prevents fuel and air leaks that can cause rough running, hard starting, or fuel seepage near exhaust components. Replacing a worn or damaged clip with this correct-size B8 unit ensures the hose is held at the specified retention point without over-tightening or distorting the hose fitting.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 80, BFS 100, BFS 914AB, BFS 935A, BFS 935AB, BFS 935AL, BFS 940A\u003c\/li\u003e\n\u003cli\u003eBFS 1318AB, BFS 1335A, BFS 1345A, BFS 1345AB, BFS 1345ABZ, BFS 1345AL, BFS 1345ALS, BFS 1345AS\u003c\/li\u003e\n\u003cli\u003eBFS 1350A, BFS 1350AL, BFS 1350ALS, BFS 1350AS, BFS 2020AS\u003c\/li\u003e\n\u003cli\u003eBPS 1135A, BPS 2550A\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2950A, BPU 3050A, BPU 3545A, BPU 5045A\u003c\/li\u003e\n\u003cli\u003eBV 50A-P, BV 50A-P EU, BV50A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396380917808,"sku":"WACKER-5000054136","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054136.jpg?v=1784011224"},{"product_id":"wacker-neuson-delivery-flange-packing-5000054947-for-clear-water-pumps","title":"Wacker Neuson Delivery Flange Packing 5000054947 for Clear Water Pumps","description":"\u003cp\u003eThe delivery flange packing is a sealing gasket fitted at the delivery flange within the pump components assembly of Wacker Neuson PG2A clear water and dewatering pumps. Seated at the discharge outlet connection, this packing prevents water from bypassing the flange joint, maintaining a leak-free seal between the pump body and the discharge line during operation.\u003c\/p\u003e\n\n\u003cp\u003eOver time, pump flange packings are subject to compression set and wear from repeated pressure cycles and exposure to the pumped media. A deteriorated or damaged delivery flange packing can result in visible water leakage at the discharge flange, loss of pump output pressure, and reduced flow efficiency. Replacing this packing as part of routine pump servicing restores a proper seal at the delivery port and prevents further ingress of moisture into mating surfaces.\u003c\/p\u003e\n\n\u003cp\u003eThis part is located in the PG2A Pump Components assembly, specifically at the delivery flange connection point. At $15.95, it is an economical service item to keep on hand whenever pump components are disassembled for inspection or repair.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003cli\u003ePG2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396383604784,"sku":"WACKER-5000054947","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054947.jpg?v=1784011249"},{"product_id":"wacker-neuson-washer-5000054955-for-clear-water-dewatering-pumps","title":"Wacker Neuson Washer 5000054955 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis washer is a PG2A pump component, seated within the pump assembly of Wacker Neuson PG-series clear water and dewatering pumps. Washers in pump assemblies serve as load-distributing fastener hardware, providing a bearing surface that protects mating components from damage during assembly and operation. Proper installation of this washer helps ensure fasteners are seated correctly within the pump's internal structure, which is especially important in water pump applications where vibration and continuous use place repeated stress on assembled joints.\u003c\/p\u003e\u003cp\u003eWhen servicing or rebuilding the pump components on a PG 2 or PG2A unit, replacing worn or damaged washers with the correct OEM specification part is necessary to maintain proper fastener load distribution and hardware integrity. Always note the model number, item number, revision number, and serial number from your unit's nameplate before ordering parts, as Wacker Neuson uses these details to confirm correct part fitment.\u003c\/p\u003e\u003cp\u003eThis washer fits the following Wacker Neuson models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003cli\u003ePG2A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396383932464,"sku":"WACKER-5000054955","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054955.jpg?v=1784011254"},{"product_id":"wacker-neuson-drain-plug-set-5000054956-for-clear-water-pumps","title":"Wacker Neuson Drain Plug Set 5000054956 for Clear Water Pumps","description":"\u003cp\u003eThis Drain Plug Set seals the drain ports on Wacker Neuson PG2A and PG3A series clear water and dewatering pumps, fitting within the Pump and Pump Components assemblies to prevent fluid leakage when the pump is in service and allow controlled drainage during maintenance or storage.\u003c\/p\u003e\n\n\u003cp\u003eKeeping drain plugs in good condition is a routine part of pump servicing. A compromised or missing drain plug can allow water intrusion into the pump housing during off-season storage or allow fluid to escape from the system during operation. Replacing the full set ensures all drain points are sealed with correctly matched plugs rather than field substitutes that may not seat properly or resist corrosion over time.\u003c\/p\u003e\n\n\u003cp\u003eThis set is sold as a complete unit, covering all drain plug positions across the applicable pump assemblies, including the PG2A Pump Components and PG3A Pump Components locations. Install during any scheduled maintenance interval, after pump disassembly, or any time an existing plug shows signs of damage, cross-threading, or leakage.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003cli\u003ePG2A\u003c\/li\u003e\n\u003cli\u003ePG 3\u003c\/li\u003e\n\u003cli\u003ePG 3A\u003c\/li\u003e\n\u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396384129072,"sku":"WACKER-5000054956","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054956.jpg?v=1784011258"},{"product_id":"wacker-neuson-o-ring-5000054958-for-clear-water-dewatering-pumps","title":"Wacker Neuson O-Ring 5000054958 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis O-ring, part number 5000054958, is a genuine Wacker Neuson seal located in the pump components assembly of the PG2A clear water and dewatering pump family. Positioned within the PG2A pump components group, this O-ring provides a fluid-tight seal at its designated interface in the pump housing, preventing leakage and maintaining proper pressure within the pumping system.\u003c\/p\u003e\n\n\u003cp\u003eO-rings in pump assemblies are subject to wear from continuous contact with water, pressure cycling, and routine service intervals. When an O-ring becomes cracked, compressed, or deformed, the pump may exhibit visible leakage around the pump body or reduced suction performance. Replacing the O-ring during pump disassembly, seal inspections, or any service procedure that requires opening the pump components is standard practice to ensure a proper reassembly.\u003c\/p\u003e\n\n\u003cp\u003eThis part is compatible with the following Wacker Neuson models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 2\u003c\/li\u003e\n  \u003cli\u003ePG 2A\u003c\/li\u003e\n  \u003cli\u003ePG 2TA\u003c\/li\u003e\n  \u003cli\u003ePG2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396384489520,"sku":"WACKER-5000054958","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054958.jpg?v=1784011262"},{"product_id":"wacker-neuson-mechanical-seal-5000054960-for-clear-water-dewatering-pumps","title":"Wacker Neuson Mechanical Seal 5000054960 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis mechanical seal fits within the pump components assembly of the PG 2A clear water and dewatering pump, providing the fluid-tight seal between the rotating pump shaft and the pump housing to prevent water from leaking into the engine or bearing assembly during operation.\u003c\/p\u003e\n\n\u003cp\u003eMechanical seals in centrifugal pumps like the PG 2A are subject to wear under normal operating conditions due to continuous contact between the rotating seal face and the stationary seat. Degradation of this seal is a common cause of visible water leakage around the pump body, loss of prime, or contamination of the engine oil. Replacing the mechanical seal at the first sign of leakage is the correct course of action to prevent further damage to the pump assembly.\u003c\/p\u003e\n\n\u003cp\u003eThis part is sourced directly from Wacker Neuson and carries the part number 5000054960. It is located in the PG2A Pump Components assembly and is a recognized wear item in the pump's service cycle.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396384948272,"sku":"WACKER-5000054960","price":61.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054960.jpg?v=1784011266"},{"product_id":"wacker-neuson-screw-5000054966-for-clear-water-dewatering-pumps","title":"Wacker Neuson Screw 5000054966 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis screw is a fastener used within the PG3A pump assembly, serving the pump and pump components group on Wacker Neuson PG series clear water and dewatering pumps. It secures pump components in place and must be properly torqued during any disassembly or reassembly of the pump to maintain a sound mechanical connection.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing the PG3A pump, replacing worn or damaged fasteners with the correct OEM screw ensures proper fit and torque retention. Using a non-specified substitute fastener risks inadequate clamping force or thread mismatch, which can compromise pump integrity during operation. Always refer to the applicable Wacker Neuson service manual for the correct torque specification when reinstalling pump hardware.\u003c\/p\u003e\n\n\u003cp\u003eThis screw fits the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG 3TA\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKeeping genuine fasteners on hand is a practical step when performing routine pump maintenance or unplanned field repairs. Having the correct hardware available minimizes downtime and avoids delays caused by sourcing non-OEM substitutes that may not meet Wacker Neuson specifications.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396385439792,"sku":"WACKER-5000054966","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054966.jpg?v=1784011270"},{"product_id":"wacker-neuson-screw-5000054967-for-clear-water-dewatering-pumps","title":"Wacker Neuson Screw 5000054967 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis screw is a pump components fastener for the PG2A pump assembly, securing internal pump components in Wacker Neuson PG-series clear water and dewatering pumps. It is located within the PG2A Pump Components assembly group, where reliable fastener integrity directly affects pump housing and component retention during operation.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing or rebuilding the pump assembly, fasteners in this position should be inspected for wear, corrosion, or thread damage and replaced as needed to maintain proper clamping force. Refer to your service manual for the correct torque specification for your specific installation. Standard metric torque guidelines apply based on screw thread size and grade class, as outlined in Wacker Neuson service documentation.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003cli\u003ePG 2TA\u003c\/li\u003e\n\u003cli\u003ePG2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUse this part number to confirm fitment before ordering. Cross-referencing your machine's parts diagram for the PG2A Pump Components assembly is recommended to verify correct screw position and quantity required for your repair.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396385636400,"sku":"WACKER-5000054967","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054967.jpg?v=1784011274"},{"product_id":"wacker-neuson-screw-5000054968-for-clear-water-dewatering-pumps","title":"Wacker Neuson Screw 5000054968 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis screw, Wacker Neuson part 5000054968, is a pump fastener used across multiple assembly locations including the PG2A Pump Components, PG3A Pump, PG3A Pump Components, and general Pump and Pump Components assemblies on Wacker Neuson clear water and dewatering pumps. It is a hardware fastener that secures pump components in place during operation, maintaining proper assembly integrity throughout the pump structure.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing or rebuilding any of the compatible pump models, replacing worn or damaged screws with the correct OEM-specified hardware ensures proper fit and torque retention within the pump assembly. Using the correct fastener spec matters in pump applications where vibration and fluid exposure can accelerate wear on hardware over time.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 2\u003c\/li\u003e\n  \u003cli\u003ePG 2A\u003c\/li\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG 3TA\u003c\/li\u003e\n  \u003cli\u003ePG2A\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlways verify your specific model and assembly location against your parts diagram before ordering to confirm this is the correct screw for your application. Wacker Neuson pump assemblies use multiple screw specifications across different locations, and matching the correct part number to the correct position is important during reassembly.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396386095152,"sku":"WACKER-5000054968","price":0.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054968.jpg?v=1784011279"},{"product_id":"wacker-neuson-socket-head-cap-screw-5000054969-for-clear-water-pumps","title":"Wacker Neuson Socket Head Cap Screw 5000054969 for Clear Water Pumps","description":"\u003cp\u003eThis socket head cap screw, part number 5000054969, is a fastener used in the pump and pump component assemblies of Wacker Neuson PG 2, PG 2A, PG 3, and PG 3A clear water and dewatering pumps, appearing in the PG2A Pump Components, PG3A Pump, PG3A Pump Components, Pump, and Pump Components assembly locations.\u003c\/p\u003e\n\n\u003cp\u003eSocket head cap screws of this type follow DIN 912 standards and are tightened to torque values that vary by thread size and grade. For reference, DIN 912 hex socket head cap screws in grade 8.8 are torqued to specifications ranging from 5.5 Nm for M5 threads up through higher values for larger diameters, with fine-pitch and coarse-pitch variants each requiring precise torque application per manufacturer guidelines. Always confirm the thread size and grade marking before assembly and apply the correct torque to avoid joint failure or fastener damage in pump service.\u003c\/p\u003e\n\n\u003cp\u003eUsing a genuine OEM fastener in pump component assemblies ensures dimensional accuracy and material consistency. Substituting off-grade or non-OEM hardware in fluid-handling equipment can compromise sealing surfaces and structural integrity at the pump housing.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 2\u003c\/li\u003e\n\u003cli\u003ePG 2A\u003c\/li\u003e\n\u003cli\u003ePG 3\u003c\/li\u003e\n\u003cli\u003ePG 3A\u003c\/li\u003e\n\u003cli\u003ePG2A\u003c\/li\u003e\n\u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396386521136,"sku":"WACKER-5000054969","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054969.jpg?v=1784011283"},{"product_id":"wacker-neuson-gasket-5000054992-for-clear-water-dewatering-pumps","title":"Wacker Neuson Gasket 5000054992 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis gasket installs in the pump and pump components assembly of the PG3A clear water pump, providing a sealing interface within the pump housing to prevent fluid leakage during operation. Wacker Neuson service procedures specify that the gasket should be replaced each time the lubricant is inspected or changed, making it a routine maintenance item rather than a repair-only part.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing the PG3A pump, the gasket works in conjunction with other internal components including the mechanical seal, impeller, volute, and rear flange plate. Any time these components are disturbed or replaced, inspect the gasket and replace it as needed to maintain a proper seal. Using a fresh gasket during reassembly helps ensure the pump housing seals correctly after impeller clearance adjustments or other internal service work.\u003c\/p\u003e\n\n\u003cp\u003eThis part fits the following Wacker Neuson models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eRefer to the Wacker Neuson PG 2A \/ 3A maintenance documentation for full service intervals and pump disassembly procedures before installation. Verify the part number 5000054992 against your machine's parts diagram before ordering.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396386914352,"sku":"WACKER-5000054992","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054992.jpg?v=1784011287"},{"product_id":"wacker-neuson-washer-5000054999-for-clear-water-and-dewatering-pumps","title":"Wacker Neuson Washer 5000054999 for Clear Water and Dewatering Pumps","description":"\u003cp\u003eThis washer is a pump assembly hardware component used in the PG3A pump and its associated pump components on Wacker Neuson clear water and dewatering pumps. According to Wacker Neuson maintenance documentation for the PS3 series, washers appear at multiple locations within the pump assembly, including as fastening and sealing hardware alongside bolts, nuts, and retainer plates in the volute and impeller subassembly. Proper hardware condition in these areas supports correct clamping and alignment of internal pump components such as the wear ring, wear plate, and retainer plate.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing or rebuilding the pump assembly, replacing worn or damaged washers alongside bolts and fasteners helps ensure proper torque retention and prevents loosening caused by vibration during pump operation. This part is listed under the PG3A pump and pump components assembly group.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 3\u003c\/li\u003e\n\u003cli\u003ePG 3A\u003c\/li\u003e\n\u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart number: 5000054999. Genuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396387274800,"sku":"WACKER-5000054999","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000054999.jpg?v=1784011291"},{"product_id":"wacker-neuson-screw-5000068966-for-floor-saws-pumps-generators","title":"Wacker Neuson Screw 5000068966 for Floor Saws, Pumps \u0026 Generators","description":"\u003cp\u003eThis screw, part number 5000068966, is a genuine Wacker Neuson fastener used across governor assemblies, air cleaner and muffler assemblies, ignition system gas actuation assemblies, and carburetor assemblies on a wide range of Wacker Neuson equipment. It appears in assembly positions including the BFS 735 Governor, BFS 735A Governor, BPU 2440A ignition system gas actuation, BPU 2540A Governor, and related control assemblies, securing critical subassemblies in place during operation.\u003c\/p\u003e\n\n\u003cp\u003eBecause this screw is used across such a broad range of machine families, including floor saws, portable generators, vibratory plates, dewatering pumps, trash pumps, diaphragm pumps, clear water pumps, internal vibrators, trowels, walk-behind rollers, and truss screeds, having the correct fastener on hand helps avoid downtime when servicing governor or air cleaner components. Using the correct OEM screw ensures proper thread engagement and torque retention in the assemblies where it is specified.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 100, BFS 735, BFS 735A, BFS 80, BFS 940A\u003c\/li\u003e\n\u003cli\u003eBFS 1318AB, BFS 1318AS, BFS 1335A, BFS 1345A, BFS 1345AB, BFS 1345ABZ, BFS 1345AL, BFS 1345ALS, BFS 1345AS\u003c\/li\u003e\n\u003cli\u003eBFS 1350A, BFS 1350AL, BFS 1350ALS, BFS 1350AS\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 914AB, BFS 935A, BFS 935AB, BFS 935AL\u003c\/li\u003e\n\u003cli\u003eBPS 1135A, BPS 2550A, BPS1030A US, BPS1030Aw US, BPS1135A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396448976944,"sku":"WACKER-5000068966","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000068966.jpg?v=1784011975"},{"product_id":"wacker-neuson-woodruff-key-5000068967-for-vibratory-plates-and-rammers","title":"Wacker Neuson Woodruff Key 5000068967 for Vibratory Plates and Rammers","description":"\u003cp\u003eThis Woodruff key, part number 5000068967, is a crescent-shaped shaft key that locks the flywheel to the crankshaft on a wide range of Wacker Neuson compaction and power equipment, preventing rotational slippage between the two components. It is seated at the flywheel assembly on multiple machine configurations, including the A5000\/160 ANSI Flywheel, A5000\/160 ISO Flywheel, BFS 735 Flywheel, BFS 735A Flywheel, BPU 2440A Exhaust-Tank-Flywheel, BPU 2450A Exhaust-Tank-Flywheel, and BPU 2540A flywheel assemblies.\u003c\/p\u003e\n\n\u003cp\u003eA sheared or worn Woodruff key typically results in flywheel misalignment, ignition timing loss, or engine failure to start, making it a common inspection point during engine service and after overload events. Replacing this key during flywheel removal or crankshaft service restores correct rotational alignment between the flywheel and shaft.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPS1030A, BPS1030Aw, BPS1135A, BPS1135Aw, BPS1340A, BPS1340Aw, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS1550Aw, BPS1550Aws, BPS2050A, BPS2050Aw\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US, BPU 3050A, BPU2540A CN\u003c\/li\u003e\n\u003cli\u003eBS 50-4As, BS 60-4As, BS 70-4As, BS50-4As, BS50-4As 11in\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396449534000,"sku":"WACKER-5000068967","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000068967.jpg?v=1784011980"},{"product_id":"wacker-neuson-drain-plug-set-5000070000-for-clear-water-pumps","title":"Wacker Neuson Drain Plug Set 5000070000 for Clear Water Pumps","description":"\u003cp\u003eThis Drain Plug Set seals the drain ports on the PG3A pump assembly, preventing fluid leakage during operation and allowing controlled drainage during maintenance or winterization of the pump.\u003c\/p\u003e\n\n\u003cp\u003eSourced directly from Wacker Neuson, this drain plug set is designed for use in the pump and pump components assembly of the PG3A clear water and dewatering pump line. Drain plugs on these pumps are subject to periodic removal for draining the pump casing, making them wear-prone items that benefit from having a replacement set on hand. Wacker Neuson manuals caution operators not to open drain or discharge plugs while the pump is hot, so these plugs should only be removed after the unit has cooled to a safe temperature. Keeping a spare set available helps ensure a proper seal is reinstalled promptly after servicing, reducing downtime in the field.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePG 3\u003c\/li\u003e\n\u003cli\u003ePG 3A\u003c\/li\u003e\n\u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396459135024,"sku":"WACKER-5000070000","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070000.jpg?v=1784012091"},{"product_id":"wacker-neuson-o-ring-5000070002-for-clear-water-dewatering-pumps","title":"Wacker Neuson O-Ring 5000070002 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis O-Ring (part number 5000070002) seals the pump assembly on Wacker Neuson PG3A series clear water and dewatering pumps, installed within the PG3A pump and pump components at the pump housing interface. O-rings in pump assemblies maintain fluid boundaries between mating surfaces, and a worn or degraded O-ring in this location can result in water leakage around the pump body, loss of prime, or reduced discharge pressure during operation.\u003c\/p\u003e\n\n\u003cp\u003eReplacing this seal at the first sign of seepage or during routine pump servicing helps prevent water intrusion into surrounding components. The PG3A pump operates at 3600 rpm driven by a Honda GX160 engine producing 3.6 kW (4.8 hp), meaning the pump assembly runs under continuous hydraulic load during use. Keeping the pump's sealing surfaces intact supports consistent operation across demanding dewatering and clear water transfer applications.\u003c\/p\u003e\n\n\u003cp\u003eThis O-ring is compatible with the following Wacker Neuson models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG 3TA\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396459659312,"sku":"WACKER-5000070002","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070002.jpg?v=1784012095"},{"product_id":"wacker-neuson-mechanical-seal-5000070004-for-clear-water-dewatering-pumps","title":"Wacker Neuson Mechanical Seal 5000070004 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis mechanical seal fits within the pump assembly of Wacker Neuson PG 3 and PG 3A clear water and dewatering pumps, sealing the rotating pump shaft where it passes through the pump housing to prevent water from leaking into the engine or oil-wetted components. It is located in the PG3A pump components section, directly within the pump unit itself.\u003c\/p\u003e\n\n\u003cp\u003eThe PG 3 and PG 3A pumps are rated for a maximum suction lift of 7.5 to 8 meters (25 to 26 feet) and a maximum discharge head of up to 30 meters (98 feet), with a 75 mm (3-inch) suction and discharge diameter. Operating under those pressures and flow rates, the mechanical seal is subject to continuous wear from shaft rotation and water contact. Signs of seal failure typically include visible water weeping around the pump shaft or contamination of the pump oil. Replacing the mechanical seal at the first sign of leakage prevents further damage to surrounding pump components.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWacker Neuson PG 3\u003c\/li\u003e\n  \u003cli\u003eWacker Neuson PG 3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart number 5000070004. Genuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396459888688,"sku":"WACKER-5000070004","price":65.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070004.jpg?v=1784012099"},{"product_id":"wacker-neuson-screw-5000070010-for-clear-water-dewatering-pumps","title":"Wacker Neuson Screw 5000070010 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis screw is a genuine Wacker Neuson pump component used in the PG3A pump assembly, serving as a fastener within the pump and pump component group on PG-series clear water and dewatering pumps. Proper installation of pump fasteners is important for maintaining housing integrity and preventing leaks or misalignment in the pump assembly.\u003c\/p\u003e\n\n\u003cp\u003eWhen replacing screws in the pump assembly, follow standard torque procedures to avoid over-tightening or under-tightening, which can lead to stripped threads, housing damage, or compromised sealing at the pump interface. Refer to your Wacker Neuson service documentation for the torque specification appropriate to the screw grade and thread size of this fastener before installation.\u003c\/p\u003e\n\n\u003cp\u003eThis screw is compatible with the following Wacker Neuson models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG 3TA\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eConfirm your machine's model number, item number, revision, and serial number from the nameplate before ordering to ensure correct fitment. These details are required when sourcing the correct replacement part for your specific unit.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396460281904,"sku":"WACKER-5000070010","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070010.jpg?v=1784012103"},{"product_id":"wacker-neuson-m8-hex-nut-5000070014-for-clear-water-dewatering-pumps","title":"Wacker Neuson M8 Hex Nut 5000070014 for Clear Water \u0026 Dewatering Pumps","description":"\u003cp\u003eThis M8 hexagonal nut secures pump components within the PG2A and PG3A pump assemblies on Wacker Neuson clear water and dewatering pumps, appearing across the PG Pump Components and Pump assembly locations. The M8 thread specification is integral to the fastening system that holds pump subassemblies together, and using the correct size and grade nut ensures proper clamping force is maintained across the pump structure.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing or rebuilding the pump assembly, replacing worn, stripped, or corroded fasteners like this M8 hex nut with genuine OEM hardware helps preserve the integrity of the fastened joints. Wacker Neuson pump documentation identifies this nut across multiple assembly positions including PG2A Pump Components, PG3A Pump, PG3A Pump Components, and general Pump and Pump Components locations, making it a useful item to have on hand during any pump disassembly or reassembly procedure.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Wacker Neuson pump models:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePG 2\u003c\/li\u003e\n  \u003cli\u003ePG 2A\u003c\/li\u003e\n  \u003cli\u003ePG 2TA\u003c\/li\u003e\n  \u003cli\u003ePG 3\u003c\/li\u003e\n  \u003cli\u003ePG 3A\u003c\/li\u003e\n  \u003cli\u003ePG 3TA\u003c\/li\u003e\n  \u003cli\u003ePG2A\u003c\/li\u003e\n  \u003cli\u003ePG3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396460806192,"sku":"WACKER-5000070014","price":0.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070014.jpg?v=1784012107"},{"product_id":"wacker-neuson-valve-cover-5000070839-for-generators-trowels-pumps","title":"Wacker Neuson Valve Cover 5000070839 for Generators Trowels Pumps","description":"\u003cp\u003eThis valve cover, Wacker Neuson part 5000070839, mounts at the cylinder head and cylinder housing on a wide range of Wacker Neuson engines, sealing the valve train assembly from contamination and retaining oil within the cylinder head. It is sourced directly from the cylinder head assembly on models including the BPU 2440A, CT 24-4A, CT 36-5A, and compatible portable generators, trowels, vibratory plates, and pumps listed below.\u003c\/p\u003e\n\n\u003cp\u003eThe valve cover sits at the top of the cylinder head, protecting the rocker arms, valves, and related components from debris and environmental exposure. Replacing a cracked, warped, or leaking valve cover helps prevent oil loss and keeps the engine running cleanly. This part is used across a broad range of Wacker Neuson equipment families, including portable generators, walk-behind trowels, reversible vibratory plates, trash pumps, diaphragm pumps, clear water pumps, dewatering pumps, track dumpers, rollers, internal vibrators, and truss screeds.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1550A, AP 1550AW, AP1135A\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US\u003c\/li\u003e\n\u003cli\u003eCT 24-4A, CT24-4A, CT24-4A EU\u003c\/li\u003e\n\u003cli\u003eCT 36-5A, CT 36-5A EU, CT 36-5A-C, CT36-5A, CT36-5A EU, CT36-5A-C\u003c\/li\u003e\n\u003cli\u003eCT 30ADT, CT 30AGT, CT 30AGT-E, CT30ADT, CT30ADT-E\u003c\/li\u003e\n\u003cli\u003eCT 36ADP, CT 36ADP-E, CT 36ADT, CT 36ADT-E\u003c\/li\u003e\n\u003cli\u003eD3.5A2, D3.5A3, DT05, DT08\u003c\/li\u003e\n\u003cli\u003eG 2.1A, G 2.1AE, G 2.5A, G 5.7AE, GP 2500A, GV 2500 A, GV 2500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396462837808,"sku":"WACKER-5000070839","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070839.jpg?v=1784012124"},{"product_id":"wacker-neuson-cylinder-head-gasket-5000070942-for-vibratory-plates","title":"Wacker Neuson Cylinder Head Gasket 5000070942 for Vibratory Plates","description":"\u003cp\u003eThis gasket seals the cylinder head assembly on a wide range of Wacker Neuson engines, fitting the cylinder head and cylinder housing locations across compaction plates, pumps, floor saws, trowels, screeds, generators, and internal vibrators. A properly seated cylinder head gasket maintains compression and prevents combustion gases, coolant, or oil from escaping between the cylinder head and engine block, keeping the engine running within its designed parameters.\u003c\/p\u003e\n\n\u003cp\u003ePart number 5000070942 is listed under the following assembly locations: A5000\/160 ANSI Cylinder head, A5000\/160 ISO Cylinder head, BFS 735 Cylinder head, BFS 735A Cylinder head, BFS735 CN Cylinder Head, BFS735 Cylinder head, and BPU 2440A Cylinder head and Cylinder housing. When replacing this gasket, always clean mating surfaces thoroughly and torque the cylinder head fasteners to the specification listed in the service manual for the specific model being serviced.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030Aw, BPS1135A, BPS1135Aw, BPS1340A, BPS1340Aw, BPS1340Aws, BPS1550A, BPS1550Aw, BPS1550Aws, BPS2050A, BPS2050Aw\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US, BPU 3050A\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396463329328,"sku":"WACKER-5000070942","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070942.jpg?v=1784012128"},{"product_id":"wacker-neuson-cylinder-head-screw-5000070943-for-pumps-plates","title":"Wacker Neuson Cylinder Head Screw 5000070943 for Pumps \u0026 Plates","description":"\u003cp\u003eThis screw secures the cylinder head assembly on a range of Wacker Neuson pumps, vibratory plates, and walk-behind trowels, fitting directly into the cylinder head, cylinder head\/cover, and cylinder head-cylinder housing locations across multiple machine families.\u003c\/p\u003e\n\n\u003cp\u003ePart number 5000070943 is listed under the cylinder head assemblies for clear water pumps, dewatering pumps, diaphragm pumps, modular internal vibrators, single direction plates, vibratory plates, and walk-behind trowels. Proper installation and torque of cylinder head fasteners is important to maintaining compression integrity and preventing leaks at the cylinder head gasket interface. When replacing cylinder head hardware, inspect the mating surfaces and replace any fasteners showing corrosion, thread damage, or deformation before reassembly.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000\u003c\/li\u003e\n\u003cli\u003eAP1135A\u003c\/li\u003e\n\u003cli\u003eCT 24-4A \/ CT24-4A \/ CT24-4A EU\u003c\/li\u003e\n\u003cli\u003eCT 30ADT \/ CT30ADT \/ CT30ADT-E\u003c\/li\u003e\n\u003cli\u003ePDI 2A \/ PDI 3A\u003c\/li\u003e\n\u003cli\u003ePDT 2A \/ PDT 3A\u003c\/li\u003e\n\u003cli\u003ePG 2A \/ PG2A\u003c\/li\u003e\n\u003cli\u003eVP 1135A \/ VP 1135AW\u003c\/li\u003e\n\u003cli\u003eWP 1235A \/ WP 1235Aw \/ WP 1235Aw-L \/ WP1235Aw-LL\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396463362096,"sku":"WACKER-5000070943","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070943.jpg?v=1784012132"},{"product_id":"wacker-neuson-valve-guide-5000070944-for-vibratory-plates-more","title":"Wacker Neuson Valve Guide 5000070944 for Vibratory Plates \u0026 More","description":"\u003cp\u003eThis valve guide, part number 5000070944, fits within the cylinder head assembly on a wide range of Wacker Neuson equipment, including vibratory plates, floor saws, trowels, pumps, and portable generators. Installed in the cylinder head, the valve guide maintains precise alignment of the intake and exhaust valves, controlling valve stem movement and ensuring a proper seal between the valve and seat during engine operation.\u003c\/p\u003e\n\n\u003cp\u003eThis part is located in the cylinder head assembly across numerous configurations, including the A5000\/160 ANSI cylinder head, A5000\/160 ISO cylinder head, BFS 735 cylinder head, BFS 735A cylinder head, BPU 2540A cylinder head, and BPU 2540A US cylinder head, among others. Worn or damaged valve guides can cause increased oil consumption, rough engine operation, and poor compression, making timely replacement important during cylinder head service or engine rebuild procedures.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS1550Aw, BPS1550Aws, BPS2050A, BPS2050Aw\u003c\/li\u003e\n\u003cli\u003eBPU 2540A, BPU 2540A US, BPU 3050A, BPU2540A CN\u003c\/li\u003e\n\u003cli\u003eCT 24-4A, CT 30ADT, CT 30AGT, CT 30AGT-E, CT 36-5A, CT 36-5A EU, CT 36-5A-C\u003c\/li\u003e\n\u003cli\u003eCT 36ADP, CT 36ADP-E, CT 36ADT, CT 36ADT-E\u003c\/li\u003e\n\u003cli\u003eCT24-4A, CT24-4A EU, CT30ADT, CT30ADT-E, CT36-5A, CT36-5A EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396463853616,"sku":"WACKER-5000070944","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070944.jpg?v=1784012137"},{"product_id":"wacker-neuson-cylinder-head-stud-5000070948-for-vibratory-plates","title":"Wacker Neuson Cylinder Head Stud 5000070948 for Vibratory Plates","description":"\u003cp\u003eThis stud secures the cylinder head assembly on a range of Wacker Neuson engines, fitting the cylinder head and cylinder housing locations across multiple compaction and pump machine families. It is used in assemblies including the A5000\/160 ANSI cylinder head, A5000\/160 ISO cylinder head, BFS 735 cylinder head, BFS 735A cylinder head, BPU 2440A cylinder head and cylinder housing, BPU 2540A cylinder head, and BPU 2540A US cylinder head.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPS1030A, BPS1030A US, BPS1030Aw, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A US, BPS1135Aw, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A US, BPS1340Aw, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS1550Aw, BPS1550Aws\u003c\/li\u003e\n\u003cli\u003eBPS2050A, BPS2050Aw\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US, BPU 3050A, BPU25\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis stud spans a wide range of machine families including vibratory plates, reversible plates, single direction plates, walk-behind rollers, floor saws, trowels, trash pumps, dewatering pumps, diaphragm pumps, clear water pumps, portable generators, internal vibrators, modular internal vibrators, and truss screeds.\u003c\/p\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396464246832,"sku":"WACKER-5000070948","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070948.jpg?v=1784012141"},{"product_id":"wacker-neuson-dowel-pin-5000070950-for-vibratory-plates-and-pumps","title":"Wacker Neuson Dowel Pin 5000070950 for Vibratory Plates and Pumps","description":"\u003cp\u003eThis dowel pin (part number 5000070950) is a precision alignment pin used at the cylinder head and cylinder housing assemblies across a wide range of Wacker Neuson compaction, pumping, and power equipment. Dowel pins of this type locate and register mating components, such as cylinder heads to cylinder housings, ensuring accurate positioning and a secure, repeatable fit during assembly and service.\u003c\/p\u003e\n\n\u003cp\u003eThis pin is installed at the following assembly locations: A5000\/160 ANSI cylinder head, A5000\/160 ISO cylinder head, BFS 735 cylinder head, BFS 735A cylinder head, BFS735 CN cylinder head, BPU 2440A cylinder head and cylinder housing, and related assemblies. When replacing cylinder head gaskets, performing top-end engine service, or reassembling pump housings, worn or damaged dowel pins can compromise alignment and lead to improper seating of mating surfaces.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030A US, BPS1030Aw, BPS1030Aw EU, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A EU, BPS1135A US, BPS1135Aw, BPS1135Aw EU, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A EU, BPS1340A US, BPS1340Aw, BPS1340Aw EU, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS1550Aw, BPS1550Aws\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396464738352,"sku":"WACKER-5000070950","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070950.jpg?v=1784012145"},{"product_id":"wacker-neuson-slider-5000070953-for-rammers-and-vibratory-plates","title":"Wacker Neuson Slider 5000070953 for Rammers and Vibratory Plates","description":"\u003cp\u003eThis slider installs in the cylinder head, cylinder housing, cylinder block, and crankcase cover assemblies of Wacker Neuson vibratory rammers and compaction plates, serving as a precision-fit sliding component within the engine's internal mechanical assembly.\u003c\/p\u003e\n\n\u003cp\u003ePart number 5000070953 fits a wide range of Wacker Neuson rammer models including the BS 50-4As, BS 60-4As, and BS 70-4As series, as well as BPU series vibratory plates and BFS floor saw models. On the BS-series rammers, this slider is located in the cylinder block and crankcase cover, positioning it as part of the lower engine assembly that manages reciprocating motion. On the BPU 2440A and BPU 2450A, it is found in the cylinder head and cylinder housing assembly.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBS 50-4As, BS50-4As, BS50-4As 11in, BS50-4As 11in US\u003c\/li\u003e\n\u003cli\u003eBS 60-4As, BS60-4As, BS60-4As 11in, BS60-4As 11in CN, BS60-4As 11in US\u003c\/li\u003e\n\u003cli\u003eBS 65-4As 11in, BS 70-4As, BS70-4As\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396465197104,"sku":"WACKER-5000070953","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070953.jpg?v=1784012149"},{"product_id":"wacker-neuson-washer-5000070959-for-rammers-plates-saws","title":"Wacker Neuson Washer 5000070959 for Rammers, Plates \u0026 Saws","description":"\u003cp\u003eThis washer, part number 5000070959, is a genuine Wacker Neuson hardware component installed at the cylinder head, cylinder housing, cylinder block, and crankcase cover locations across a wide range of Wacker Neuson rammers, vibratory plates, floor saws, and pumps. It is positioned in these assemblies to provide proper load distribution and sealing at fastened joints within the engine and drive housing structures, including the crankcase cover on BS-series rammers and the cylinder housing on the BPU 2440A vibratory plate.\u003c\/p\u003e\n\n\u003cp\u003eSourcing the correct washer by exact part number is important in these applications, as washers at cylinder block and crankcase cover joints are sized and rated for specific clamping loads. Using an incorrect substitute risks improper sealing or fastener loosening in high-vibration environments typical of compaction and cutting equipment.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBPU 2440A, BPU 2450A, BPU 2540A, BPU 2540A US\u003c\/li\u003e\n\u003cli\u003eBS 50-4As, BS 60-4As, BS 70-4As\u003c\/li\u003e\n\u003cli\u003eBS50-4As, BS50-4As 11in, BS50-4As 11in o. bsz, BS50-4As 11in US, BS50-4AS 11IN US\u003c\/li\u003e\n\u003cli\u003eBS60-4As, BS60-4As 11in, BS60-4As 11in CN, BS60-4As 11in US, BS60-4AS 11IN US\u003c\/li\u003e\n\u003cli\u003eBS65-4As 11in, BS70-4As\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396465688624,"sku":"WACKER-5000070959","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070959.jpg?v=1784012153"},{"product_id":"wacker-neuson-radial-ball-bearing-6222-5000070961-for-vibratory-rammers","title":"Wacker Neuson Radial Ball Bearing 6222 5000070961 for Vibratory Rammers","description":"\u003cp\u003ePart number 5000070961 is a 6222 series radial ball bearing used in the crankcase cover, crankcase, cylinder block, and base cover assemblies of Wacker Neuson rammers, vibratory plates, and pump units. This deep-groove radial ball bearing seats within the crankcase and cylinder block to support rotating shaft loads, maintaining alignment between the crankshaft and housing during operation.\u003c\/p\u003e\n\n\u003cp\u003eThe 6222 designation identifies the bearing's bore, outer diameter, and width dimensions within the standard metric ball bearing series. It is installed at multiple locations depending on the model, including the crankcase cover on BS50-4As, BS60-4As, and BS70-4As rammers, as well as pump crankcase and base cover assemblies on BPS-series units.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030A US, BPS1030Aw, BPS1030Aw EU, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A EU, BPS1135A US, BPS1135Aw, BPS1135Aw EU, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A EU, BPS1340A US, BPS1340Aw, BPS1340Aw EU, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBS50-4As, BS50-4As 11in, BS50-4As 11in o. bsz, BS50-4As 11in US\u003c\/li\u003e\n\u003cli\u003eBS60-4As, BS60-4As 11in, BS60-4AS 11IN US\u003c\/li\u003e\n\u003cli\u003eBS70-4As\u003c\/li\u003e\n\u003cli\u003eA 3000, AP 1135A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396466081840,"sku":"WACKER-5000070961","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070961.jpg?v=1784012158"},{"product_id":"wacker-neuson-shaft-seal-5000070962-for-vibratory-rammers-and-pumps","title":"Wacker Neuson Shaft Seal 5000070962 for Vibratory Rammers and Pumps","description":"\u003cp\u003eThis shaft seal fits at the cylinder head and cylinder liner assemblies on Wacker Neuson BS 50-4As and BS 60-4As vibratory rammers, as well as BPS-series diaphragm and dewatering pumps, where it prevents fluid or lubricant migration past the rotating shaft. Shaft seals in these assemblies are subject to wear from continuous shaft rotation and exposure to pumped media or lubrication fluids, making timely replacement important when leakage or oil weeping is observed around the cylinder head or liner interface.\u003c\/p\u003e\n\n\u003cp\u003eThis seal is used across multiple assembly variants of the BS 50-4As, including the standard, 11-inch, and US-specification configurations, covering both cylinder head and cylinder liner positions. It also applies to the BS 60-4As 11-inch assembly. On the BPS pump series, it serves units across EU, US, and standard regional build specifications.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1135A\u003c\/li\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030A US\u003c\/li\u003e\n\u003cli\u003eBPS1030Aw, BPS1030Aw EU, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A EU, BPS1135A US\u003c\/li\u003e\n\u003cli\u003eBPS1135Aw, BPS1135Aw EU, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A EU, BPS1340A US\u003c\/li\u003e\n\u003cli\u003eBPS1340Aw, BPS1340Aw EU, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBS 50-4As, BS50-4As, BS50-4As 11in, BS50-4As 11in US, BS50-4As 11in o. bsz\u003c\/li\u003e\n\u003cli\u003eBS 60-4As, BS60-4As, BS60-4As 11in\u003c\/li\u003e\n\u003cli\u003eBS 70-4As\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396466507824,"sku":"WACKER-5000070962","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070962.jpg?v=1784012162"},{"product_id":"wacker-neuson-washer-5000070963-for-vibratory-plates-and-pumps","title":"Wacker Neuson Washer 5000070963 for Vibratory Plates and Pumps","description":"\u003cp\u003eThis washer, part number 5000070963, seats at the base cover and cylinder housing assemblies on a wide range of Wacker Neuson compaction and pump equipment, providing a secure seating surface for fasteners and helping maintain proper clamping force across mating components including the cylinder head and cylinder housing interfaces.\u003c\/p\u003e\n\n\u003cp\u003eSourced directly from Wacker Neuson's OEM parts catalog, this washer appears across multiple assembly locations including the BPU 2540A cylinder housing, BPU 2440A cylinder head to cylinder housing interface, BFS735 cylinder housing, BPS1030A base cover, and the BPU 2540A maintenance kit. Its broad fitment across compaction plates, floor saws, pumps, and portable power equipment reflects its use in high-vibration environments where proper hardware retention is important for safe and reliable operation.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBPS1030A, BPS1030Aw (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135Aw (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340Aw, BPS1340Aws (EU and US variants)\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS2050A\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eBFS 2020AS\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396466868272,"sku":"WACKER-5000070963","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070963.jpg?v=1784012166"},{"product_id":"wacker-neuson-threaded-plug-5000070964-for-vibratory-plates-and-pumps","title":"Wacker Neuson Threaded Plug 5000070964 for Vibratory Plates and Pumps","description":"\u003cp\u003eThis threaded plug (part number 5000070964) seals ports in cylinder housings and base covers across a wide range of Wacker Neuson equipment, including vibratory plates, pumps, floor saws, and portable generators. It is installed at assembly locations such as the cylinder housing on BPU 2540A models, BFS 735 cylinder housings, and base cover positions on BS50 and related units, providing a secure, leak-free closure at threaded openings in the engine and housing assemblies.\u003c\/p\u003e\n\n\u003cp\u003eThreaded plugs at these locations prevent contamination ingress and fluid loss during operation. A failed or missing plug can allow debris into the cylinder housing or result in oil or fluid leakage, leading to accelerated wear or machine downtime. Replacing a damaged or stripped plug with the correct OEM part ensures proper thread engagement and sealing integrity at the specified port.\u003c\/p\u003e\n\n\u003cp\u003eThis part is compatible with the following Wacker Neuson models:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBPS1030A, BPS1030A EU, BPS1030A US, BPS1030Aw, BPS1030Aw EU, BPS1030Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1135A, BPS1135A EU, BPS1135A US, BPS1135Aw, BPS1135Aw EU, BPS1135Aw US\u003c\/li\u003e\n\u003cli\u003eBPS1340A, BPS1340A EU, BPS1340A US, BPS1340Aw, BPS1340Aw EU, BPS1340Aw US, BPS1340Aws\u003c\/li\u003e\n\u003cli\u003eBPS1550A, BPS1550Aw\u003c\/li\u003e\n\u003cli\u003eBFS 614AB, BFS 735, BFS 735A, BFS735, BFS735 CN\u003c\/li\u003e\n\u003cli\u003eAP 1135A, AP 1550A, AP 1550AW\u003c\/li\u003e\n\u003cli\u003eVP1340A, VP1340Aw, VP1550A, VP1550Aw, VP2050A, VP2050Aw\u003c\/li\u003e\n\u003cli\u003eWP1540A, WP1540Aw, WP1550A, WP1550Aw\u003c\/li\u003e\n\u003cli\u003eA 3000, A 5000, A5000\/160 ANSI, A5000\/160 ISO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396467261488,"sku":"WACKER-5000070964","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000070964.jpg?v=1784012169"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/collections\/wacker-neuson-pst2-400-2in-submersible-trash-pump-5000009112.jpg?v=1783574153","url":"https:\/\/cce-industries.com\/collections\/wacker-neuson-clear-water-pump-parts.oembed?page=2","provider":"CCE Industries","version":"1.0","type":"link"}