{"product_id":"12316","title":"Multiquip 12316 Thrust Collar Bushing with Hole - OEM Replacement Part for Power Trowels","description":"\u003cp\u003eThe thrust collar bushing with hole is a critical wear component that prevents excessive play between the thrust collar and spider assembly in Multiquip power trowels. When this bushing wears beyond specification, it allows the thrust collar to tilt and rock on the spider, causing uneven rotor operation and surface defects in finished concrete.\u003c\/p\u003e\n\n\u003cp\u003eAccording to Multiquip troubleshooting procedures, if the thrust collar can tilt more than 1\/16 inch (1.6 mm) as measured at the thrust collar outer diameter, the bushing must be replaced immediately. This measurement is performed by rocking the thrust collar on the spider during routine maintenance inspections. Worn thrust collar bushings are a common cause of swirls and surface imperfections in concrete finishing operations. When replacing thrust collar bushings, technicians should also verify that the thrust collar itself varies no more than 0.02 inch (0.5 mm) when rotated on the spider, and that all trowel arm bushings are within specification.\u003c\/p\u003e\n\n\u003cp\u003eThis bushing is compatible with the following Multiquip power trowel models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHHXD5\u003c\/li\u003e\n\u003cli\u003eHHXDF4\u003c\/li\u003e\n\u003cli\u003eHHXG5\u003c\/li\u003e\n\u003cli\u003eMD105\u003c\/li\u003e\n\u003cli\u003eSTXDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Multiquip OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Multiquip","offers":[{"title":"Default Title","offer_id":43068302884912,"sku":"12316","price":106.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/12316.png?v=1779913029","url":"https:\/\/cce-industries.com\/products\/12316","provider":"CCE Industries","version":"1.0","type":"link"}