{"product_id":"wacker-neuson-v-belt-5000051013-for-vibratory-plates","title":"Wacker Neuson V-Belt 5000051013 for Vibratory Plates","description":"\u003cp\u003eThis V-belt sits in the beltguard and clutch assembly of compatible Wacker Neuson vibratory plate compactors, transmitting power from the engine pulley to the exciter pulley through the clutch system. Part number 5000051013 is the factory-specified belt for these machines.\u003c\/p\u003e\u003cp\u003eOn new machines or after installing this belt, check tension after the first 20 hours of operation, then inspect and adjust every 50 hours. Correct belt deflection is 10-13 mm (3\/8 in to 1\/2 in) measured midway between the pulleys. To adjust, loosen the two beltguard screws and remove the guard, then loosen the four nuts holding the engine to the console and the screw securing the beltguard back to the console. Slide the engine rearward toward the handle to increase tension, or forward to decrease it. Confirm that the clutch pulley and exciter pulley are in alignment using a straight edge before finalizing the adjustment. Torque all nuts and screws to 20.5 Nm (15 ft.lbs.) on reassembly.\u003c\/p\u003e\u003cp\u003eCompatible with the following Wacker Neuson models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMPU 29\u003c\/li\u003e\n\u003cli\u003eMPU 29A\u003c\/li\u003e\n\u003cli\u003eVP 2050A\u003c\/li\u003e\n\u003cli\u003eVP 2050R\u003c\/li\u003e\n\u003cli\u003eVP 2050Y\u003c\/li\u003e\n\u003cli\u003eVP2050(RAW)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Wacker Neuson OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Wacker Neuson","offers":[{"title":"Default Title","offer_id":43396365025328,"sku":"WACKER-5000051013","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/5000051013.jpg?v=1784011084","url":"https:\/\/cce-industries.com\/products\/wacker-neuson-v-belt-5000051013-for-vibratory-plates","provider":"CCE Industries","version":"1.0","type":"link"}