{"product_id":"y0601803076","title":"Multiquip Y0601803076 Selector Switch - OEM Replacement Part for Welders","description":"\u003cp\u003eThe selector switch controls critical welding mode and current range selection on Multiquip DLW500ESA4 welder-generators, allowing operators to toggle between single mode (30-500A CC \/ 14-40V CV) and dual mode (30-280A CC \/ 14-29V CV) operation. This 3-position switch is essential for proper welder configuration and must never be switched during active welding operations to prevent contact failure.\u003c\/p\u003e\n\n\u003cp\u003eWhen positioned in single mode, this selector enables full 500-amp constant current welding through A-side terminals only, with B-side terminals disabled. In dual mode, the switch allows simultaneous operation of both A and B welding terminals at reduced capacity (280A max). The switch works in conjunction with the e-Mode selector to control engine speed (1200 rpm low \/ 1800 rpm high) based on welding load requirements.\u003c\/p\u003e\n\n\u003cp\u003eCritical operating note from Multiquip technical manuals: DO NOT SWITCH UNDER LOAD. Switching the selector during welding operations will cause switch contacting failure and potential equipment damage. This switch is located on the main control panel and is a key component for safe, efficient welder operation.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following Multiquip models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDLW500ESA4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGenuine Multiquip OEM part, sold by an authorized dealer.\u003c\/p\u003e","brand":"Multiquip","offers":[{"title":"Default Title","offer_id":43067847966768,"sku":"Y0601803076","price":1071.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/6574\/7248\/files\/Y0601803076.png?v=1779912825","url":"https:\/\/cce-industries.com\/products\/y0601803076","provider":"CCE Industries","version":"1.0","type":"link"}