Multiquip 065103020 Dust Seal MTR-80G - OEM Replacement Part

The dust seal protects critical internal components of the guide spindle assembly on Multiquip tamping rammers from contamination during operation. This seal prevents dust, dirt, and debris from entering the lubrication system and guide mechanisms, which is essential for preventing excessive wear and maintaining proper operation. According to Multiquip maintenance procedures, dust should be regularly brushed away from the guide spindle by removing the dust protection sleeve, and this seal serves as the primary barrier against contaminant ingress during high-impact compaction work.

During rammer operation, the foot delivers 650 blows per minute at 2,850 lbs. of impact force, generating significant dust and debris that can compromise internal mechanisms if seals fail. Worn or damaged dust seals allow abrasive particles to contaminate the grease lubrication system, leading to accelerated wear of the guide spindle and reduced rammer performance. This seal should be inspected during routine maintenance intervals and replaced if cracking, tearing, or compression set is observed.

Compatible with the following Multiquip tamping rammer models:

• MTR-80L

Genuine Multiquip OEM part, sold by an authorized dealer.