Multiquip 11097 Clutch Control Cable Assembly - OEM Replacement Part for Walk-Behind Trowels

The clutch control cable assembly enables precise engagement and disengagement of the V-belt pulley drive system that transfers power from the engine to the gearbox on walk-behind power trowels. This cable connects the hand clutch lever on the handle to the clutch mechanism, allowing operators to safely control trowel engagement during concrete finishing operations.

During operation, the clutch lever is squeezed toward the handle to engage the drive system. The cable housing features an adjustment nut at the clutch lever that allows for fine-tuning clutch engagement by rotating to provide more or less engagement depending on wear and operational needs. Proper clutch cable adjustment is critical for safe trowel operation—the operator must be able to grip the handle firmly and smoothly engage the clutch while maintaining control, especially during initial engagement at 1/4 to 1/3 engine speed.

Signs that replacement may be needed include difficulty engaging or disengaging the clutch, inconsistent clutch response, fraying cable strands, or inability to achieve proper adjustment even after turning the adjustment nut. Regular inspection of the cable assembly helps prevent unexpected failure during critical finishing work.

Compatible with the following Multiquip models:

• CA4HM Walk-Behind Trowel

Genuine Multiquip OEM part, sold by an authorized dealer.