Multiquip 30310 Fresno Brush Kit 36" - OEM Replacement Part for Walk-Behind Trowels

This 36-inch fresno brush kit creates textured and decorative finishes on concrete surfaces by following the path of the fresno blade and combination blades on walk-behind power trowels. The fresno brush operates in a floating configuration, allowing operators to independently match brush pressure to their troweling preference without manually adjusting pitch on each pass. The brush contacts concrete using the sides of the bristles rather than the ends, providing consistent decorative texture over large areas.

The brush mounts to spring-loaded pins on the brush arms of the mechanical boom assembly. To reposition, pull the spring-loaded pins on each side of the brush arm, adjust the fresno brush as needed, then release the pins to lock in position. The boom winch crank handle raises and lowers the entire assembly including the brush, fresno blade, and optional plated weights. The mechanical boom rotates 180° laterally for operator preference and surface coverage.

This complete brush kit is designed for the PRO36 model with a 36.5-inch ring diameter and 36-inch path width. Multiple brush stiffness options are available (black/soft, orange/medium, grey/stiff) to achieve different texture results.

Compatible models:

• PRO36

Genuine Multiquip OEM part, sold by an authorized dealer.