Multiquip 480007 Oil Seal CR-19599 - OEM Replacement Part for Walk-Behind Saws

This oil seal protects the blade shaft bearings in Multiquip walk-behind saws, preventing lubricant loss from the oil bath design cast iron housing. The blade shaft assembly on these saws features oil-lubricated bearings within a fully enclosed housing—this seal is critical for maintaining that sealed environment and preventing contamination that could cause premature bearing failure.

The blade shaft operates at speeds ranging from 1800-2900 RPM depending on pulley configuration, with a shaft diameter of 2-3/8 inches (60mm). Given these operating conditions and the oil bath lubrication system, maintaining seal integrity is essential for the "no lubrication requirements" design these saws are known for. A failing oil seal will show symptoms including oil leakage around the blade shaft area, reduced cutting performance, or unusual bearing noise.

This seal is compatible with multiple Multiquip/STOW walk-behind saw models:

• CS403016
• CS706016
• PS403016
• PS706016
• SP403016
• SP605716
• SP6457
• SP706016

Genuine Multiquip OEM part, sold by an authorized dealer.