Multiquip M1358203004 Wire Harness Emergency - OEM Replacement Part for Super Silent Generators

This emergency wire harness addresses a critical control panel issue in Multiquip super silent generators where the warning lamp may remain dimly lit during normal engine operation when no fault is present. The harness connects to the control panel warning lamp terminals using blue and red spade connectors, integrating with the existing yellow and orange wiring to prevent false warning lamp activation.

Installation requires loosening the control panel thumb screws and lowering the panel to access wiring connections. Remove the two existing wires with blue terminals from the warning lamp, attach the new harness wires with blue spade terminals to the warning lamp terminals, then connect the red spade terminal wires from the harness to the removed blue terminal wires, matching wire colors carefully. This harness was issued as part of Multiquip Service Bulletin GSP20210208 to correct warning lamp performance on generators that were not originally equipped with the resistor wire harness during production.

Compatible generator models:

• DCA20SPXU4F
• DCA25SSIU4F
• DCA25SSIU4FC8

Genuine Multiquip OEM part, sold by an authorized dealer.