Multiquip 0601820848 Relay Over Current DENYO - OEM Replacement Part

The over current relay is a critical protective component that monitors current flow from the generator's output terminal lugs (U, V, and W) to connected loads, automatically tripping the main circuit breaker in the event of a short circuit or overcurrent condition. This relay works in tandem with the 3-pole main circuit breaker to protect the generator's output terminals and internal components from overload damage.

When an overload occurs, both the circuit breaker and the over current relay may trip. If the main circuit breaker cannot be reset after tripping, the reset button on this relay must be pressed before power can be restored to the output terminal panel. The relay is located inside the generator's control box for protected access. This is a common troubleshooting scenario documented in Multiquip service procedures—if your circuit breaker trips and won't reset, check this relay first.

Compatible with the following Multiquip/DENYO generator models:

• DCA125SSJU4i
• DCA150SSJU4F
• DCA220SSJU4F
• DCA300SSJU4F
• DCA400SSI4F
• DCA40SSKU4F
• DCA45SSIU4F
• DCA70USI
• DCA70USI3CAN

Genuine Multiquip OEM part, sold by an authorized dealer.