Multiquip 0601830762 Switch Selector Auto/Manual - OEM Replacement Part

This selector switch controls the operating mode of your generator, allowing you to toggle between automatic start/stop operation and manual control. Critical for both remote monitoring applications and jobsite flexibility, this three-position switch (Auto/Off-Reset/Manual) ensures proper shutdown sequencing and fault reset capability.

During shutdown procedures, the Auto Off/Reset Manual Switch must be placed in the OFF/RESET position after allowing the engine to cool at low speed for 3-5 minutes with no load applied. The OFF/RESET position is also required before inspecting the generator and must be used in conjunction with placing all circuit breakers in the OFF position. This switch position is essential for clearing faults through the controller and verifying that all status LEDs on the ECU control panel are off before maintenance.

Compatible with the following Multiquip generator models:

• DCA125SSIU4F
• DCA20SPXU4F
• DCA25SSIU4F
• DCA25SSIU4FC8
• DCA36SPXU4F
• DCA45SSIU4F
• DCA45SSIU4FC8
• DCA70SSIU4F
• DCA70USI3CAN

Genuine Multiquip OEM part, sold by an authorized dealer.