Multiquip 15897 3VX355 V-Belt - OEM Replacement Part for Pavement Saws

This 3VX355 V-belt transfers power from the engine clutch pulley to the vibrator pulley on Multiquip pavement saws, driving the blade shaft for cutting operations. Proper belt tension is critical for safe and efficient saw operation—Multiquip specifications call for 3/8 inch (10mm) to 1/2 inch (13mm) deflection when depressed at the midpoint between pulleys.

Regular inspection and replacement of this belt is essential preventive maintenance. A worn or improperly tensioned belt can cause loss of cutting power, excessive vibration, and premature bearing failure on the blade shaft. Always check belt condition with the engine off and wear safety gloves during inspection or replacement to prevent injury. Never attempt to check or adjust the V-belt with the engine running, as contact between your hand and the moving belt or clutch can cause severe injury.

After installing a new belt, verify proper tension and replace all guards and covers before operation. This belt is engineered to handle the demanding loads of professional pavement cutting with diamond blades up to 20 inches in diameter.

Compatible Models:

• SP2S20H Pavement Saw

Genuine Multiquip OEM part, sold by an authorized dealer.