Available to order.
Controls blade pitch adjustment on walk-behind power trowels, allowing the operator to change the angle of the finishing blades during operation, a critical function for achieving proper surface finish and preventing blade skip or uneven concrete consolidation. When this cable stretches, frays, or loses spring tension, pitch response becomes sluggish or inconsistent, making precise troweling impossible and risking surface defects.
This OEM replacement pitch control cable includes the integrated return spring and measures 910mm from hole to end of lug, ensuring a direct, no-modification fit. The spring provides consistent return tension so the pitch mechanism resets reliably after each adjustment. Using a correctly sized OEM cable is essential, an improperly tensioned or incorrect-length cable can cause delayed pitch response, binding in the control linkage, or loss of blade angle control entirely.
When replacing the cable, inspect the pitch control lever pivot, lug attachment point, and any guide brackets for wear or corrosion before installation. Ensure the spring is fully seated and the lug is secured without slack to maintain accurate pitch feel through the full range of travel.
Compatible with the following Bartell Global walk-behind power trowel models:
Genuine Bartell Global OEM part, sold by an authorized dealer.
